
Preparation 30 B 500 ml
Read the instructions carefully before use!
Preparation 30 (v) - mineral oil emulsion.
It has no toxic or neuroparalytic effects, but disrupts the air-water balance of pest larvae and eggs, leading to their death.
Directions for use:
Shake well before use!
To prepare the solution, add water to the product and mix thoroughly. Use the resulting solution to thoroughly spray the crowns and trunks of trees and shrubs. The solution must be used within 2 hours. The product’s effectiveness is significantly reduced if any areas are left untreated.
Dissolve the following in 10 liters of water:
· for early spring treatment (before bud break, when the 24-hour average air temperature is not lower than +4°C) – 300–400 ml (1.5–2 cups). The maximum concentration should not exceed 4%. The best results are achieved when treating swollen buds. Treatment is performed once.
· for summer treatment when the first to third generations of scale insect nymphs emerge (during July–August) – 200–250 ml. The maximum concentration should not exceed 2.5%. Treatment is performed once.
Application rates as a wetting agent: (50–100 ml) per 10 L of tank mix.
Application rates for the ready-to-use solution: 0.2–1.5 liters per tree. (Application rates per hectare: 12–40 liters).
The product’s protective effect lasts 5–10 days. Onset of action occurs within 1 day. The interval between the last application and harvest is 20 days. People may enter treated areas after 3 days.
It is used against overwintering stages of pests such as the California scale, scale insects, psyllids, whiteflies, leafrollers, aphids, mealybugs, copper aphids, moths, garden spider mites, and bud mites, brown, red, fruit, and acacia mites, sawflies, and others on apple, pear, cherry, plum, apricot, grape, currant, and rose plants.
The product also acts as an adhesive and is compatible with most powder and liquid formulations, as well as organic insecticides and fungicides. When used in combination with pesticides compatible with "Preparation 30 (v)" k.e. (as an adhesive), the biological and economic effectiveness of treatments is enhanced.
When preparing a mixture of various products, first dissolve additives in water, such as copper and iron sulfate and others, then add this mixture to "Preparation 30 (B)" k.e. ° The product is not significantly affected by environmental factors (sun, wind, rain)
SAFETY PRECAUTIONS:
The product is classified as Safety Class V; it is low-toxicity, non-flammable, and non-explosive. In case of fire, use: carbon dioxide and dry powder fire extinguishers, water, or sand.
Always wear personal protective equipment when handling the product. Do not eat, drink, or smoke while working with the product.
The product is toxic to bees. Do not apply the product while bees are flying.
Do not allow residues of the product, working solution, or containers to enter water bodies. Transport, equipment, and product residues must be decontaminated with bleaching powder, a 10% solution of soda ash, or a 5% solution of caustic soda, and incinerated at an authorized site.
Reuse of containers is prohibited.
FIRST AID
If the product is ingested:
into the stomach—the victim should be given several glasses of water to drink, preferably warm, and vomiting should be induced by stimulating the back of the throat with the fingers. Repeat this procedure 2–3 times to completely remove the product from the stomach. Then give the victim a suspension of activated charcoal (2–3 tablespoons in half a glass of water);
in the eyes—rinse with plenty of water:
On the skin—thoroughly remove the substance with a gauze pad, then rinse with plenty of water and soap.
At the first signs of poisoning, the victim should seek medical attention.
Storage:
Store the product only in its original packaging, in a dry, dark, well-ventilated area (at a temperature between +4°C and +25°C), separate from food, beverages, animal feed, flammable substances, and out of the reach of children.
After using the product, wash the container with water.
Guaranteed shelf life: 2 years when stored according to instructions.