UCHKUDUK emitter drip tape, 16 mm x 0.18 mm, 1.4 L/h, drippers every 30 cm, 500 m

Durable, efficient, and seamless drip tape with a rigid Uchkuduk emitter. It consists of a thin-walled hose with water delivery points installed on the inner surface of the tube at 30 cm intervals. Used for irrigating vegetable, fruit, and flower crops both in open fields and in greenhouses.

Technical specifications:

Tape thickness – 7.2 mil (0.18 mm)
Tape diameter – 16 mm
Distance between emitters – 30 cm
Flow rate – 1.4 L/h per emitter
Length – 500 m

Advantages:

- The main advantage of the emitter tape is the presence of self-cleaning emitters, which reduce the accumulation of particles inside the labyrinth, even at low operating pressures;
- When using drip tape, plants receive an optimal amount of moisture throughout the entire growing season, which leads to active root system development;
- Ensures uniform water distribution and its efficient use in root-zone irrigation;
- The drip tape can be laid both on the soil surface and underground;
- During installation, the tape lies flat without kinks, making it easy to lay and install. If necessary, it can be easily turned in any direction;
- The irrigation tape is made of plastic that is resistant to UV rays, chemicals, fertilizers, and micronutrients.

Application:

Types of drip tape applications	Method of application
Filtration	To ensure uninterrupted operation of the Uchkuduk system, water must be filtered; for this purpose, a filter of the appropriate design should be used. Filters can be: cyclone, disc, mesh, or filters for granular quartzite. Depending on the type of water used for irrigation. A filtration rating of 150 mesh (100 microns) is recommended
Fertigation	Chemicals used in fertigation must be in water-soluble form only and should be introduced into the system before the filters. After fertilization irrigation is complete, before stopping the water flow, ensure that all chemicals and fertilizers have been completely flushed from the system.